ITERとは? 国内機関(JADA)の活動 ITER機構(IO)の活動 ITER公募案内 一般の方へ 刊行物
トップページ  >  論文発表



Bonifetto, R., Brighenti, A., Isono, T., et al., "Analysis of the cooldown of the ITER central solenoid model coil and insert
   coil" Supercond. Sci. Technol., 30, 15015 (2017).
Hemmi, T., Matsui, K., Kajitani, H., et al., "Development of ITER Toroidal Field Coil in Japan" IEEE Trans. Appl. Supercond.,
   27, 4200105 (2017).


Kojima, A., Hanada, M., Jeong, SH., et al., "Demonstration of long-pulse acceleration of high power positive ion beam with
   JT-60 positive ion source in Japan-Korea joint experiment" Fusion Eng. Des., 102, 81 (2016).

Darbos, C., Albajar, F., Bonicelli, T., et al., "Status of the ITER Electron Cyclotron Heating and Current Drive System"
   J. Infrared Millim. Terahertz Waves, 37, 4 (2016).

Anderson, JP., Doane, JL., Grunloh, HL., et al., "Heating Effects in Overmoded Corrugated Waveguide for ITER" J. Infrared
   Millim. Terahertz Waves, 37, 55 (2016).

Agostinetti, P., Aprile, D., Antoni, V., et al., "Detailed design optimization of the MITICA negative ion accelerator in view
   of the ITER NBI" Nucl. Fusion, 56, 16015 (2016).

Imazawa, R., Kawano, Y., Ono, T., et al., "Development of real-time rotating waveplate Stokes polarimeter using multi
   order retardation for ITER poloidal polarimeter" Rev. Sci. Instrum., 87, 13503 (2016).

Yatsuka, E., Hatae, T., Suitoh, S., et al., "Development of laser beam injection system for the Edge Thomson Scattering
   (ETS) in ITER" J. Instrum., 11, C01006 (2016).

Bassan, M., Andrew, P., Kurskiev, G., et al., "Thomson scattering diagnostic systems in ITER" J. Instrum., 11, C01052 (2016).

Kojima, A., Hanada, M., Tobari, H., et al., "Development of design technique for vacuum insulation in large size
   multi-aperture multi-grid accelerator for nuclear fusion" Rev. Sci. Instrum., 87, 02B304 (2016).

Hiratsuka, J., Hanada, M., Kojima, A., et al., "Measurement of heat load density profile on acceleration grid in MeV-class
   negative ion accelerator" Rev. Sci. Instrum., 87, 02B137 (2016).

Hanada, M., Kojima, A., Tobari, et. al., "Development of the negative ion beams relevant to ITER and JT-60SA at Japan
   Atomic Energy Agency" Rev. Sci. Instrum., 87, 02B322 (2016).

Yoshida, M., Hanada, M., Kojima, A., et al., "Time evolution of negative ion profile in a large cesiated negative ion source
   applicable to fusion reactors" Rev. Sci. Instrum., 87, 02B144 (2016).

Sasao, H., Kawano, Y., Arakawa, H., et al., "Development of CO2 laser interferometer/polarimeter system in JT-60SA"
   J. Instrum., 11, C02082 (2016).

Takemoto, T., Kitazawa, S., Ogawa, H., et al., "Investigation of cat's eye mirror with seven reflective surfaces for
   in-situ spectral calibration system on divertor impurity monitor for ITER" OPTIK, 127, 2950 (2016).

Ozeki, H., Isono, T., Uno, Y., et al., "Manufacture and Quality Control of Insert Coil With Real ITER TF Conductor" IEEE
   Trans. Appl. Supercond, 26, 4202504 (2016).

NishikioriI, R., Kojima, A., Hanada. M., et al., "Evaluation of Dark Current Profile for Prediction of Voltage Holding
   Capability on Multi-Aperture Multi-Grid Accelerator for ITER" Plasma and Fusion Research, 11, 2401014 (2016).

Sakurai, T., Iguchi, M., Nakahira, M., et al., "Mechanical Properties of Welded Joint at Cryogenic Temperature for
   Manufacturing of ITER TF Coil Structure" IEEE Trans. Appl. Supercond, 26, 4204705 (2016).

Koizumi, N., Nakahira, M., Matsui, K., et al., "Progress in Procurement of ITER Toroidal Field Coil in Japan" IEEE Trans.
   Appl. Supercond, 26, 4203004 (2016).

Suwa, T., Nabara, Y., Takahashi, Y., et al., "Cable Behavior During Manufacture of a 900-m Scale CICC" IEEE Trans. Appl.
   Supercond, 26, 4803505 (2016).

Edao, Y., Sato, K., Iwai, Y., et al., "Effect of hydrocarbons on the efficiency of catalytic reactor of detritiation system
   in an event of fire" J. Nucl. Sci. Technol., 53, 1831 (2016).
石川正男, 今澤良太, "小特集 最近の核融合中性子工学の進展 6. ITER に関するニュートロニクス活動" プラズマ・核融合
   学会誌, 44, 278 (2016).

Tojo, H., Hatae, T., Itami, K., "An insitu spectral calibration method for the Thomson scattering diagnostic for new fusion
   experiments" Fusion Science and Technology, 69, 546 (2016).

Imazawa, R., Kawano, Y., Itami, K., "Theoretical and numerical evaluation of polarimeter using counter-circularlypolarized-
   probing-laser under the coupling between Faraday and Cotton-Mouton effect" Rev. Sci. Instrum., 87, 43512 (2016).

梶谷秀樹, 石山敦士, 我妻洸, 他, "核融合炉用 CIC 導体の超伝導特性評価手法の開発" 低温工学, 51, 71 (2016).

Takeuchi, M., Sugie, T., Takeyama, S., et al., "Development of the In Situ Calibration Method for ITER Divertor IR 
   Thermography" Fusion Sci. Technol., 69, 655 (2016).

T. Maruyama, S. Kitazawa, H. Ogawa, et al., "Preliminary Thermal Analysis of Critical Components in ITER Lower Port #02"
   Plasma and Fusion Research, 11, 2405083 (2016).
井上多加志, 杉本誠, 草間義紀, 他, "ITER 計画の機器開発・製作の進展 1. はじめに" プラズマ・核融合学会誌, 92, 393

名原啓博, 諏訪友音, 尾関秀将, 他, "ITER 計画の機器開発・製作の進展 2. ITER トロイダル磁場コイル用及び中心ソレノイド
   用超伝導導体の製作 " プラズマ・核融合学会誌, 92, 396 (2016).
辺見努, 梶谷秀樹, 松井邦浩, 他, "ITER 計画の機器開発・製作の進展 3. ITER トロイダル磁場コイルの製作 " プラズマ・
   核融合学会誌, 92, 402 (2016).
野口悠人, 丸山孝仁, 齋藤真貴子, 他, "ITER 計画の機器開発・製作の進展 4. ITER ブランケット遠隔保守機器の開発 "
   プラズマ・核融合学会誌, 92, 408 (2016).
渡邊和弘, 前島哲也, 柏木美恵子, 他, "ITER 計画の機器開発・製作の進展 5. ITER NBTF 電源高電圧機器の製作 " プラズマ・
   核融合学会誌, 92, 414 (2016).
池田亮介, 小田靖久, 梶原 健, 他, "ITER 計画の機器開発・製作の進展 6. ITER 電子サイクロトロン波加熱・電流駆動システム
   の開発 " プラズマ・核融合学会誌, 92, 420 (2016).
江里幸一郎, 鈴木哲, 関洋治, "ITER 計画の機器開発・製作の進展 7. ITER ダイバータ・ターゲットの開発 " プラズマ・核融合
   学会誌, 92, 427 (2016).
伊丹潔, 河野康則, 波多江仰紀, 他, "ITER 計画の機器開発・製作の進展 8. ITER 計測装置の開発 " プラズマ・核融合学会誌,
   92, 433 (2016).
林巧, 中村博文, 岩井保則, 他, "ITER 計画の機器開発・製作の進展 9. ITER トリチウムプラントの開発 " プラズマ・核融合
   学会誌, 92, 440 (2016).
河村繕範, 廣瀬貴規, 西宏, 他, "ITER 計画の機器開発・製作の進展 10. ITER テストブランケット計画 " プラズマ・核融合
   学会誌, 92, 444 (2016).
井上多加志, イーター日本国内機関, "ITER 計画の機器開発・製作の進展 11. おわりに " プラズマ・核融合学会誌, 92, 448
Nabara, Y., Suwa, T., Ozeki, H., et al., "Performance Analysis of Mass-Produced Nb3Sn Conductor for Central Solenoid in
   ITER" IEEE Trans. Appl. Supercond, 26, 4200705 (2016).
 石山 敦士, 高橋 良和, "特集「ITER-CS インサート・コイルの実験結果」に寄せて" 低温工学, 51, 96 (2016).
諏訪 友音, 尾関 秀将, 名原 啓博, 他, "ITER-CSインサート・コイルの常伝導伝播とホットスポット温度の解析" 低温工学, 51,
   122 (2016).
尾関 秀将, 諏訪 友音, 礒野 高明, 他, "ITER-CSインサート・コイルにおける誘導加熱ヒーターを用いた安定性試験" 低温工学,
   51, 113 (2016).

名原 啓博, 齊藤 徹, 諏訪 友音, 他, "ITER-CSインサート・コイルの分流開始温度特性" 低温工学, 51, 102 (2016).

礒野 高明, 河野 勝己, 布谷 嘉彦, 他, "ITER-CSインサート・コイル試験" 低温工学, 51, 97 (2016).
谷川尚, "小特集 核融合炉の○○を計算せよ‐炉設計支援ツールの進展 4. ブランケットを設計せよ " プラズマ・核融合学会誌,
   92, 597 (2016).
Edao, Y., Iwai, Y., Sato, K., et al., "Experimental investigation on feasible bioreactor using mechanism of hydrogen
   oxidation of natural soil for detritiation system" Appl. Radiat. Isot., 114, 40 (2016).

Singh, MJ., Boilson, D., Hemsworth, RS., et al., "Heating Neutral Beams for ITER: Present Status" IEEE Trans. Plasma Sci.,
   44, 1496 (2016).
 Tanaka, K., Coda, S., Yoshida, M., et al., "Design of tangential viewing phase contrast imaging for turbulence measurements
   in JT-60SA" Rev. Sci. Instrum., 87, 11E118 (2016).

Tojo, H., Yamada, I., Yasuhara, R., et al., "Validations of calibration-free measurements of electron temperature using
   double-pass Thomson scattering diagnostics from theoretical and experimental aspects" Rev. Sci. Instrum., 87, 93502 (2016).

Icikawa, M., Yoshida, M., Kojima, A., et al., "Investigation of Oxygen-Induced-Arcing in Cs-Seeded Negative Ion Source"
   Plasma and Fusion Reserch, 11, 2405108 (2016).
Pyon, S., Suwa, T., Park, A., et al., "Enhancement of critical current densities in (Ba, K)Fe2As2 wires and tapes using HIP
   technique" Supercond. Sci. Technol., 29, 115002 (2016).

Kitazawa, S., Wakai, E., Aoto, K., "Evaluation of annealing and double ion beam irradiation by a laser-induced and laser-
   detected surface acoustic wave diagnostic system" Radiat. Phys. Chem., 127, 264 (2016).

Yamamoto, T., Yatsuka, E., Hatae, T., et al., "New Proposal on the Development of Machine Protection Function for ITER
   Diagnostics Control" Plasma and Fusion Research, 11, 2405114 (2016).

Ishikawa, M., Kondoh, T., et al., "Neutron Transport Analysis of the Processes Affecting the in situ Calibration of ITER
   In-Vessel Neutron Flux Monitors Equipped with a Micro-Fission Chamber System" Plasma and Fusion Research, 11,
1402118 (2016).

Ezato, K., Suzuki, S., Seki, Y., et al., "Progress of ITER full tungsten divertor technology qualification in Japan:
   Manufacturing full-scale plasma-facing unit prototypes" Fusion Eng. Des., 109-111, 1256 (2016).

Matsui, K., Hemmi, T., Kajitani, H., et al., "Full scale trials for qualification of the manufacture of the ITER TF coils in
   Japan" Fusion Eng. Des., 109-111, 574 (2016).

Kawamura, Y., Hayashi, T., Yamanishi, T., "Isotope exchange reaction of tritium on precious metal catalyst based on cation-
   exchanged mordenite for blanket tritium recovery" Fusion Eng. Des., 109-111, 1614 (2016).

Ishikawa, M., Takeda, K., Itami, K., "Development of in-vessel neutron flux monitor equipped with microfission chambers to
   withstand the extreme ITER environment" Fusion Eng. Des., 109-111, 1399 (2016).

Saito, M., Anzai, K., Maruyama, T., et al., "Development of radiation hard components for ITER blanket remote handling
   system" Fusion Eng. Des., 109-111, 1502 (2016).
Sakurai, T., Iguchi, M., Nakahira, M., et al., "Development of manufacturing technology for ITER TF Coil Structure" Fusion
   Eng. Des., 109-111, 1592 (2016).
Kawamura, Y., Tanigawa, H., Hirose, T., et al., "Progress of R&D on water cooled ceramic breeder for ITER test blanket
   system and DEMO" Fusion Eng. Des., 109-111, 1637 (2016).
Noguchi, Y., Maruyama, T., Ueno, K., et al., "Impact hammer test of ITER blanket remote handling system" Fusion Eng.
   Des., 109-111, 1291 (2016).
Seki, Y., Ezato, K., Suzuki, S., et al., "A study of plasma facing tungsten components with electrical discharge machined
   surface exposed to cyclic thermal loads" Fusion Eng. Des., 109-111, 1148 (2016).
Kitazawa, S., Ogawa, H., "Failure mode analysis of preliminary design of ITER divertor impurity monitor" Fusion Eng. Des.,
   112, 74 (2016).
Matsui, K., Hemmi, T., Kajitani, H., et al., "Full scale trials for qualification of the manufacture of the ITER TF coils in
   Japan" Fusion Eng. Des., 109, 574 (2016).
Ioki, K., Hiranai, S., Moriyama, S., et al., "Development of a dummy load and waveguide components for 1 MW CW
   gyrotron" Fusion Eng. Des., 109, 951 (2016).
Oda, Y., Ikeda, R., Fukunari, M., et al., "Controllability Study of Propagating Mode Content by an Angle-Adjustable Mirror of
   a Miter-Bend in EC H&CD Transmission Line" IEEE Trans. Plasma Sci., 44, 3392 (2016).

鈴木哲, 朝倉伸幸, "小特集 原型炉に向けてのタダイバータの研究開発課題 -現状と展望- 4. ITER 及び原型炉ダイバータ工学
   現状と研究開発" プラズマ・核融合学会誌, 92, 886 (2016).